Peli Storm iM2100 Base Bezel Kit for Panel mounting
The iM2100-MBEZ-B Base Bezel Kit turns the base of a Peli Storm iM2100 case into a ready-made mounting chassis for your own electronics. Instead of drilling and improvising a way to fix control panels, switches, displays or interface hardware inside a case, you bolt in a purpose-matched aluminium frame and get a rigid, level surface built for exactly that job. A polymer O-ring combined with a silicone perimeter gasket keeps the case watertight and dust-tight at the panel boundary — even with the lid open and the panels actively in use, which is the whole point of a bezel-mounted build.
Purpose-Built for the iM2100 Storm Case
This is not a generic mounting plate cut down to fit — the iM2100-MBEZ-B is designed and dimensioned specifically for the Peli Storm iM2100 base compartment. The aluminium rails and moulded corner pieces locate precisely within the case interior and install without any modification to the shell, giving integrators a stable, repeatable mounting chassis for fixed panel-mount electronics, communications gear and custom embedded hardware. Because the fit is exact, every iM2100-MBEZ-B kit installs the same way, which matters when you're building more than one unit to the same spec.
Watertight Protection, Even With the Lid Open
A polymer O-ring and a silicone perimeter gasket work together to seal the bezel assembly against the case base. That dual-seal arrangement is what makes the design useful in practice: it maintains environmental protection for the base compartment even when the lid is fully open, so panel-mounted electronics can be read, adjusted and operated in rain, dust and high-humidity conditions without ever removing them from the protective housing. For equipment that has to be monitored or controlled in the field — not just carried there — that difference matters.
M4 Metric Fastening for Fast, Standardised Installs
Tapped holes along the top rail use the M4 metric thread standard, so the bezel is compatible with standard panel-mount hardware, DIN rail components and mil-spec fasteners without adapters. Sticking to one metric standard throughout keeps installation simple and repeatable across a fleet of cases, cuts down on the fastener inventory a workshop needs to keep on hand, and removes the usual back-and-forth of sourcing thread-conversion hardware when a project spec calls for metric components.
Everything Needed for a Complete Installation
The kit ships complete: aluminium rails, moulded corner pieces, rivets and sealing washers, all sized specifically for the iM2100 case base. There is nothing extra to source and nothing to cut or drill — the components install directly into the case shell as supplied, so a build can move straight from unboxing to panel fitting.
Who Uses a Base Bezel Kit
Base bezel kits like the iM2100-MBEZ-B are the standard answer for anyone who needs to turn a protective case into a working instrument housing rather than just a container. That covers field service and test engineers building a portable diagnostics station, communications and broadcast teams integrating radios or interface panels into a ruggedised case, systems integrators producing several identical units to a fixed configuration, and defence or industrial teams standardising panel-mount electronics across a fleet of Peli Storm cases. In every case the logic is the same: keep the electronics accessible and operable, and keep the case's watertight protection intact while you do it.
At a Glance
- Model: Peli Storm iM2100-MBEZ-B Base Bezel Kit
- Fits: Peli Storm iM2100 case base compartment only
- Frame: Aluminium rails with moulded corner pieces, precision-fitted to the iM2100 base
- Sealing: Polymer O-ring plus silicone perimeter gasket — watertight/dust-tight even with the lid open
- Fastening: M4 metric tapped holes along the top rail
- Included hardware: Aluminium rails, moulded corner pieces, rivets, sealing washers
- Installation: No cutting or modification to the case shell required
- Typical use: Panel-mount electronics, interface hardware, communications and control systems built into a Peli Storm iM2100 case
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The iM2100-MBEZ-B Base Bezel Kit turns the base of a Peli Storm iM2100 case into a ready-made mounting chassis for your own electronics. Instead of drilling and improvising a way to fix control panels, switches, displays or interface hardware inside a case, you bolt in a purpose-matched aluminium frame and get a rigid, level surface built for exactly that job. A polymer O-ring combined with a silicone perimeter gasket keeps the case watertight and dust-tight at the panel boundary — even with the lid open and the panels actively in use, which is the whole point of a bezel-mounted build.
Purpose-Built for the iM2100 Storm Case
This is not a generic mounting plate cut down to fit — the iM2100-MBEZ-B is designed and dimensioned specifically for the Peli Storm iM2100 base compartment. The aluminium rails and moulded corner pieces locate precisely within the case interior and install without any modification to the shell, giving integrators a stable, repeatable mounting chassis for fixed panel-mount electronics, communications gear and custom embedded hardware. Because the fit is exact, every iM2100-MBEZ-B kit installs the same way, which matters when you're building more than one unit to the same spec.
Watertight Protection, Even With the Lid Open
A polymer O-ring and a silicone perimeter gasket work together to seal the bezel assembly against the case base. That dual-seal arrangement is what makes the design useful in practice: it maintains environmental protection for the base compartment even when the lid is fully open, so panel-mounted electronics can be read, adjusted and operated in rain, dust and high-humidity conditions without ever removing them from the protective housing. For equipment that has to be monitored or controlled in the field — not just carried there — that difference matters.
M4 Metric Fastening for Fast, Standardised Installs
Tapped holes along the top rail use the M4 metric thread standard, so the bezel is compatible with standard panel-mount hardware, DIN rail components and mil-spec fasteners without adapters. Sticking to one metric standard throughout keeps installation simple and repeatable across a fleet of cases, cuts down on the fastener inventory a workshop needs to keep on hand, and removes the usual back-and-forth of sourcing thread-conversion hardware when a project spec calls for metric components.
Everything Needed for a Complete Installation
The kit ships complete: aluminium rails, moulded corner pieces, rivets and sealing washers, all sized specifically for the iM2100 case base. There is nothing extra to source and nothing to cut or drill — the components install directly into the case shell as supplied, so a build can move straight from unboxing to panel fitting.
Who Uses a Base Bezel Kit
Base bezel kits like the iM2100-MBEZ-B are the standard answer for anyone who needs to turn a protective case into a working instrument housing rather than just a container. That covers field service and test engineers building a portable diagnostics station, communications and broadcast teams integrating radios or interface panels into a ruggedised case, systems integrators producing several identical units to a fixed configuration, and defence or industrial teams standardising panel-mount electronics across a fleet of Peli Storm cases. In every case the logic is the same: keep the electronics accessible and operable, and keep the case's watertight protection intact while you do it.
At a Glance
- Model: Peli Storm iM2100-MBEZ-B Base Bezel Kit
- Fits: Peli Storm iM2100 case base compartment only
- Frame: Aluminium rails with moulded corner pieces, precision-fitted to the iM2100 base
- Sealing: Polymer O-ring plus silicone perimeter gasket — watertight/dust-tight even with the lid open
- Fastening: M4 metric tapped holes along the top rail
- Included hardware: Aluminium rails, moulded corner pieces, rivets, sealing washers
- Installation: No cutting or modification to the case shell required
- Typical use: Panel-mount electronics, interface hardware, communications and control systems built into a Peli Storm iM2100 case
