Peli Storm iM20XX Base Bezel Kit for Panel mounting
An empty Peli Storm case is a blank canvas — but electronics, control panels, and communication gear need more than just a watertight box to live in. The iM20XX-M4-BEZEL Base Bezel Kit turns the base of a Peli Storm iM2050 or iM2075 case into a structured panel-mount chassis: an aluminum frame system that bolts straight into the case base and gives you a level, rigid surface for user-supplied electronic interface panels, control surfaces, or custom hardware. A silicone perimeter gasket seals the frame assembly against the case interior, preserving the case's original watertight and dust-tight protection even when the lid is fully open — so the build stays field-ready long after the fasteners are torqued down.
Purpose-Built for the iM2050 and iM2075
This is not a universal bracket forced to fit — the iM20XX-M4-BEZEL is sized and drilled specifically for the iM2050 and iM2075 Peli Storm Case base compartments. The aluminum rails and molded corner pieces locate precisely within the case interior without modification, giving fabricators and integrators a rigid, repeatable foundation for fixed panel installations in field equipment, communication systems, and ruggedised electronics. Because the fit is dedicated rather than generic, every unit installs the same way, every time — a real advantage when a fleet of identical cases needs identical panel layouts.
Watertight Protection, Even With the Lid Open
A silicone perimeter gasket runs the full interior perimeter of the bezel frame. Once panels are seated and secured, that gasket seals the panel boundary against water ingress and contamination, preserving the case's environmental protection for the base compartment even when the lid is removed or raised during active use. In practice, that means the equipment mounted to the panel stays protected while it's actually being operated in the field — not just while it's closed up and sitting in storage — which matters for anything running in wet, dusty, or otherwise hostile conditions.
M4 Metric Fastening for Fast, Standardised Builds
Every tapped mounting hole in the kit uses the M4 metric thread standard, matching the fasteners already found in panel-mount electronics, DIN rail components, and mil-spec equipment enclosures. There's no hunting for oddball thread adapters and no mixed hardware to keep track of — panels, connectors, and control surfaces designed around M4 hardware bolt straight in. That standardisation pays off twice: once during the initial build, and again every time the panel needs to come out for servicing, upgrades, or reconfiguration in the field or the workshop.
Everything Needed for a Complete Installation
The kit ships complete: aluminum rails, molded corner pieces, M4 fasteners, rivets, and washers — no additional hardware to source before you can start. Every component is pre-matched to the iM20XX bezel frame dimensions, and the whole assembly installs into a standard iM2050 or iM2075 case without cutting or drilling. That's a meaningful detail for anyone who needs the case to remain fully reversible: remove the bezel kit and the case goes right back to standard configuration, with no permanent modification left behind.
Who Uses a Base Bezel Kit
This kind of panel-mount chassis shows up wherever electronics need to travel in something tougher than a standard rack case. Field and test engineers use it to turn a Peli Storm case into a self-contained instrument or interface panel that survives transport between sites. Communications and broadcast teams mount switching, patching, or control surfaces into a case that can be deployed, struck, and redeployed without the panel ever coming loose. Systems integrators building repeatable, ruggedised enclosures rely on the dedicated fit to keep every unit in a batch consistent. And defence, industrial, and logistics fleets — the traditional home ground of the Peli Storm range — use exactly this kind of hardware to keep mission-critical electronics protected without giving up quick access in the field.
At a Glance
Fits the Peli Storm iM2050 and iM2075 case base compartments only. Aluminum frame with molded corner pieces bolts in without cutting or drilling. Silicone perimeter gasket maintains watertight and dust-tight sealing at the panel boundary, including with the lid open. All mounting holes use the M4 metric thread standard. Kit includes aluminum rails, molded corner pieces, M4 fasteners, rivets, and washers — no extra hardware required. SKU: IM20XX-M4-BEZEL.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
An empty Peli Storm case is a blank canvas — but electronics, control panels, and communication gear need more than just a watertight box to live in. The iM20XX-M4-BEZEL Base Bezel Kit turns the base of a Peli Storm iM2050 or iM2075 case into a structured panel-mount chassis: an aluminum frame system that bolts straight into the case base and gives you a level, rigid surface for user-supplied electronic interface panels, control surfaces, or custom hardware. A silicone perimeter gasket seals the frame assembly against the case interior, preserving the case's original watertight and dust-tight protection even when the lid is fully open — so the build stays field-ready long after the fasteners are torqued down.
Purpose-Built for the iM2050 and iM2075
This is not a universal bracket forced to fit — the iM20XX-M4-BEZEL is sized and drilled specifically for the iM2050 and iM2075 Peli Storm Case base compartments. The aluminum rails and molded corner pieces locate precisely within the case interior without modification, giving fabricators and integrators a rigid, repeatable foundation for fixed panel installations in field equipment, communication systems, and ruggedised electronics. Because the fit is dedicated rather than generic, every unit installs the same way, every time — a real advantage when a fleet of identical cases needs identical panel layouts.
Watertight Protection, Even With the Lid Open
A silicone perimeter gasket runs the full interior perimeter of the bezel frame. Once panels are seated and secured, that gasket seals the panel boundary against water ingress and contamination, preserving the case's environmental protection for the base compartment even when the lid is removed or raised during active use. In practice, that means the equipment mounted to the panel stays protected while it's actually being operated in the field — not just while it's closed up and sitting in storage — which matters for anything running in wet, dusty, or otherwise hostile conditions.
M4 Metric Fastening for Fast, Standardised Builds
Every tapped mounting hole in the kit uses the M4 metric thread standard, matching the fasteners already found in panel-mount electronics, DIN rail components, and mil-spec equipment enclosures. There's no hunting for oddball thread adapters and no mixed hardware to keep track of — panels, connectors, and control surfaces designed around M4 hardware bolt straight in. That standardisation pays off twice: once during the initial build, and again every time the panel needs to come out for servicing, upgrades, or reconfiguration in the field or the workshop.
Everything Needed for a Complete Installation
The kit ships complete: aluminum rails, molded corner pieces, M4 fasteners, rivets, and washers — no additional hardware to source before you can start. Every component is pre-matched to the iM20XX bezel frame dimensions, and the whole assembly installs into a standard iM2050 or iM2075 case without cutting or drilling. That's a meaningful detail for anyone who needs the case to remain fully reversible: remove the bezel kit and the case goes right back to standard configuration, with no permanent modification left behind.
Who Uses a Base Bezel Kit
This kind of panel-mount chassis shows up wherever electronics need to travel in something tougher than a standard rack case. Field and test engineers use it to turn a Peli Storm case into a self-contained instrument or interface panel that survives transport between sites. Communications and broadcast teams mount switching, patching, or control surfaces into a case that can be deployed, struck, and redeployed without the panel ever coming loose. Systems integrators building repeatable, ruggedised enclosures rely on the dedicated fit to keep every unit in a batch consistent. And defence, industrial, and logistics fleets — the traditional home ground of the Peli Storm range — use exactly this kind of hardware to keep mission-critical electronics protected without giving up quick access in the field.
At a Glance
Fits the Peli Storm iM2050 and iM2075 case base compartments only. Aluminum frame with molded corner pieces bolts in without cutting or drilling. Silicone perimeter gasket maintains watertight and dust-tight sealing at the panel boundary, including with the lid open. All mounting holes use the M4 metric thread standard. Kit includes aluminum rails, molded corner pieces, M4 fasteners, rivets, and washers — no extra hardware required. SKU: IM20XX-M4-BEZEL.
