Peli ISP EU120060-5010 – Inter-Stacking Pallet Case
Some payloads simply refuse to lie down. Missile canisters, satellite mast sections, vertical test rigs, tall sculptures on tour — anything long, narrow and upright poses the same logistics headache: standard cargo cases are built wide and shallow, not tall. The Peli™ ISP² EU120060-5010 Inter-Stacking Pallet Case exists specifically for that problem. It is a roto-moulded transport case engineered around height rather than footprint, built to carry demanding vertical loads through the same rough handling — forklifts, aircraft holds, flatbeds, dockside cranes — that would crack a lesser container.
Built Around the Stack, Not Just the Load
What sets the ISP² line apart is the Inter-Stacking Pattern itself: a 10×10 cm grid moulded into the lid and base that lets each case lock physically onto the one below it. On a pallet, in a truck, or in a ship's hold, that interlock stops loads shifting or toppling under vibration and cornering — a detail that matters far more once a stack is six cases high and the vehicle is doing motorway speeds. The footprint is deliberately matched to Euro, NATO and 463L pallet grids, so the case slots straight into existing logistics chains used by freight forwarders, defence logistics units and airlines alike, with no wasted space and no custom pallet building.
Where It Earns Its Keep
The tall, narrow format was designed with real cargo in mind, and it shows up across a wide range of demanding fields:
- Military & defence: missile canisters, rocket tubes, extended battery packs, upright sensor masts and logistics shelters that need to move between bases without damage.
- Satellite & RF: long antennas, mast sections, feed arms, satellite booms and telescopic masts destined for field deployment.
- Broadcast & IT: tall rack enclosures, lighting masts, vertical network nodes and amplifier towers travelling between venues or sites.
- Industrial & service: vertical instrumentation, columnar test rigs, long pump or hydraulic assemblies and spare-parts towers that are awkward to crate any other way.
- Museums & culture: touring sculptures, artefact pillars and other tall display pieces that need gallery-grade protection in transit.
Peli's roto-moulded shells have built their reputation in exactly this kind of demanding, repeat-use transport — the ISP² range carries that same durability into a shape purpose-built for height.
Sealed, Reinforced, Ready for the Trip
Reinforced walls and impact-resistant corners handle the knocks of repeated loading and unloading, while a tongue-and-groove seal backed by a silicone sponge O-ring keeps dust, splashback and moisture out of the interior. A mechanical pressure relief valve automatically equalises internal pressure during altitude and temperature swings, so the seal isn't fighting itself after an air freight leg or a drive through changing climates. Spring-loaded, corrosion-resistant hardware and anti-shear lid locks keep the case shut and aligned even after rough handling.
Key Features
- 10×10 cm ISP grid for cross-locking, stable stacking on pallets and in cargo holds
- Roto-moulded polyethylene shell with reinforced, impact-resistant corners
- Tongue-and-groove seal with silicone sponge O-ring for dust and splash protection
- Mechanical pressure relief valve for altitude and temperature changes
- Positive anti-shear lid locks maintain alignment under impact; recessed hardware resists snagging
- Footprint optimised for Euro, NATO and 463L pallet systems
- Available in multiple colours for fleet coding or standardisation
Technical Data
| Model | ISP² EU120060-5010 |
| Interior (L × W × D) | 111.5 × 51.5 × 57.0 cm |
| Exterior (L × W × D) | 120.0 × 60.0 × 60.0 cm |
| Lid depth | 10.0 cm |
| Bottom depth | 50.0 cm |
| Total depth | 60.0 cm |
| Internal volume | 0.327 m³ |
| Weight (empty) | 22.0 kg |
| Buoyancy | 388.4 kg |
| Body material | Roto-moulded polyethylene |
| Latch material | Steel (zinc cobalt black-plated) |
| O-ring material | Silicone sponge |
| Pins | Stainless steel (alternative: aluminium) |
| Pressure relief valve | Mechanical, aluminium body |
| Operating temperature | –30 °C to +70 °C |
| Stacking interface | 10 × 10 cm ISP grid (lid/bottom interlock) |
Note: The price of Peli ISP cases depends on order quantity and configuration. Several colours are available, with black being the most popular choice. Cases can be supplied with a hinged lid or a fully removable cover, and configured with padlock hasps, galvanised or stainless-steel hardware, pressure relief valves for air travel, and internal humidity indicators for monitoring storage conditions. Crane lifting rings or pallet bases can also be added to simplify handling. Lead time runs 4–8 weeks. Contact us for a detailed quotation and lead time.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Some payloads simply refuse to lie down. Missile canisters, satellite mast sections, vertical test rigs, tall sculptures on tour — anything long, narrow and upright poses the same logistics headache: standard cargo cases are built wide and shallow, not tall. The Peli™ ISP² EU120060-5010 Inter-Stacking Pallet Case exists specifically for that problem. It is a roto-moulded transport case engineered around height rather than footprint, built to carry demanding vertical loads through the same rough handling — forklifts, aircraft holds, flatbeds, dockside cranes — that would crack a lesser container.
Built Around the Stack, Not Just the Load
What sets the ISP² line apart is the Inter-Stacking Pattern itself: a 10×10 cm grid moulded into the lid and base that lets each case lock physically onto the one below it. On a pallet, in a truck, or in a ship's hold, that interlock stops loads shifting or toppling under vibration and cornering — a detail that matters far more once a stack is six cases high and the vehicle is doing motorway speeds. The footprint is deliberately matched to Euro, NATO and 463L pallet grids, so the case slots straight into existing logistics chains used by freight forwarders, defence logistics units and airlines alike, with no wasted space and no custom pallet building.
Where It Earns Its Keep
The tall, narrow format was designed with real cargo in mind, and it shows up across a wide range of demanding fields:
- Military & defence: missile canisters, rocket tubes, extended battery packs, upright sensor masts and logistics shelters that need to move between bases without damage.
- Satellite & RF: long antennas, mast sections, feed arms, satellite booms and telescopic masts destined for field deployment.
- Broadcast & IT: tall rack enclosures, lighting masts, vertical network nodes and amplifier towers travelling between venues or sites.
- Industrial & service: vertical instrumentation, columnar test rigs, long pump or hydraulic assemblies and spare-parts towers that are awkward to crate any other way.
- Museums & culture: touring sculptures, artefact pillars and other tall display pieces that need gallery-grade protection in transit.
Peli's roto-moulded shells have built their reputation in exactly this kind of demanding, repeat-use transport — the ISP² range carries that same durability into a shape purpose-built for height.
Sealed, Reinforced, Ready for the Trip
Reinforced walls and impact-resistant corners handle the knocks of repeated loading and unloading, while a tongue-and-groove seal backed by a silicone sponge O-ring keeps dust, splashback and moisture out of the interior. A mechanical pressure relief valve automatically equalises internal pressure during altitude and temperature swings, so the seal isn't fighting itself after an air freight leg or a drive through changing climates. Spring-loaded, corrosion-resistant hardware and anti-shear lid locks keep the case shut and aligned even after rough handling.
Key Features
- 10×10 cm ISP grid for cross-locking, stable stacking on pallets and in cargo holds
- Roto-moulded polyethylene shell with reinforced, impact-resistant corners
- Tongue-and-groove seal with silicone sponge O-ring for dust and splash protection
- Mechanical pressure relief valve for altitude and temperature changes
- Positive anti-shear lid locks maintain alignment under impact; recessed hardware resists snagging
- Footprint optimised for Euro, NATO and 463L pallet systems
- Available in multiple colours for fleet coding or standardisation
Technical Data
| Model | ISP² EU120060-5010 |
| Interior (L × W × D) | 111.5 × 51.5 × 57.0 cm |
| Exterior (L × W × D) | 120.0 × 60.0 × 60.0 cm |
| Lid depth | 10.0 cm |
| Bottom depth | 50.0 cm |
| Total depth | 60.0 cm |
| Internal volume | 0.327 m³ |
| Weight (empty) | 22.0 kg |
| Buoyancy | 388.4 kg |
| Body material | Roto-moulded polyethylene |
| Latch material | Steel (zinc cobalt black-plated) |
| O-ring material | Silicone sponge |
| Pins | Stainless steel (alternative: aluminium) |
| Pressure relief valve | Mechanical, aluminium body |
| Operating temperature | –30 °C to +70 °C |
| Stacking interface | 10 × 10 cm ISP grid (lid/bottom interlock) |
Note: The price of Peli ISP cases depends on order quantity and configuration. Several colours are available, with black being the most popular choice. Cases can be supplied with a hinged lid or a fully removable cover, and configured with padlock hasps, galvanised or stainless-steel hardware, pressure relief valves for air travel, and internal humidity indicators for monitoring storage conditions. Crane lifting rings or pallet bases can also be added to simplify handling. Lead time runs 4–8 weeks. Contact us for a detailed quotation and lead time.
